Insight into copper-mordenite–silica mixtures (CuMOR–SiO2)

A series of ternary CuMOR–SiO₂ mixed materials were prepared by two synthesis approaches (CuMOR1–y–SiO₂ and CuMOR2–y–SiO₂). Extensive characterization was done for both series and some selected materials were tested in CO catalytic oxidation and NO reduction. The presence of CuMOR and SiO₂ segregated phases was observed in both series by XRD, suggesting that silica formation was not inhibited by the mordenite (MOR) presence. UV–Vis results exhibited that Cu ion exchange was successfully done for CuMOR1–y–SiO₂ series. In the CuMOR2–y–SiO₂ series, the amount of copper was below the sensitivity limit of EDS analysis. CuMOR1–50%–SiO₂ catalyst resulted with higher specific surface area and catalytic activity. A possible relation between reduction temperature, the increase in Cu plasmon excitation, and catalytic activity was observed.     

Synthesis,Electrochemistry, and Photophysics of Aza‐BODIPY Porphyrin Dyes

The synthesis of dyad and triad aza‐BODIPY‐porphyrin systems in two steps starting from an aryl‐substituted aza‐BODIPY chromophore is described. The properties of the resulting aza‐BODIPY‐porphyrin conjugates have been extensively investigated by means of electrochemistry, spectroelectrochemistry, and absorption/emission spectroscopy. Fluorescence measurements have revealed a dramatic loss of luminescence intensity, mainly due to competitive energy transfer and photoinduced electron transfer involving charge separation followed by recombination.     

Synthesis of poly(n‐butyl acrylate) homopolymer and poly(styrene‐b‐n‐butyl acrylate‐b‐styrene) triblock copolymer via AGET emulsion ATRP using a cationic surfactant

Cationic emulsions of triblock copolymer particles comprising a poly(n‐butyl acrylate) (PⁿBA) central block and polystyrene (PS) outer blocks were synthesized by activator generated by electron transfer (AGET) atom transfer radical polymerization (ATRP). Difunctional ATRP initiator, ethylene bis(2‐bromoisobutyrate) (EBBiB), was used as initiator to synthesize the ABA type poly(styrene‐b‐n‐butyl acrylate‐b‐styrene) (PS‐PⁿBA‐PS) triblock copolymer. The effects of ligand and cationic surfactant on polymerizations were also discussed. Gel permeation chromatography (GPC) was used to characterize the molecular weight (M_n) and molecular weight distribution (MWD) of the resultant triblock copolymers. Particle size and particle size distribution of resulted latexes were characterized by dynamic light scattering (DLS). The resultant latexes showed good colloidal stability with average particle size around 100–300 nm in diameter. Glass transition temperature (T_g) of copolymers was studied by differential scanning calorimetry (DSC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 611–620     

Domino Radical Addition/Oxidation Sequence with Photocatalysis: One‐Pot Synthesis of Polysubstituted Furans from α‐Chloro‐Alkyl Ketones and Styrenes

A new domino reaction has been developed that allows the combination of styrenes and α‐alkyl ketone radicals to afford a wide array of polysubstituted furans in good to excellent yields under mild and simple reaction conditions. The key to success of this novel protocol is the use of photocatalyst fac‐Ir(ppy)₃ and oxidant K₂S₂O₈. Mechanistic studies by a radical scavenger and photoluminescence quenching suggest that a radical addition/oxidation pathway is operable.     

Lanthanum trilactate: Vibrational spectroscopic study − infrared/Raman spectroscopy

In this study lanthanum trilactate was prepared by neutralization reaction of lactic acid and lanthanum oxide, purified and identified by X-ray powder diffraction. Infrared spectra (Mid-IR region 4000–650 cm⁻¹) and Raman spectra (Stokes region 4000–100 cm⁻¹) of the high quality crystalline samples have been recorded and presented for the first time. For comparison DFT calculations were performed using Gaussian 09 D.01 and agreement between predicted and measured spectral data has been achieved. Acquired information can be utilized for substance identification for example in various industrial applications or in biological systems.     

Square‐Planar Ruthenium(II) Complexes: Control of Spin State by Pincer Ligand Functionalization

Functionalization of the PNP pincer ligand backbone allows for a comparison of the dialkyl amido, vinyl alkyl amido, and divinyl amido ruthenium(II) pincer complex series [RuCl{N(CH₂CH₂PtBu₂)₂}], [RuCl{N(CHCHPtBu₂)(CH₂CH₂PtBu₂)}], and [RuCl{N(CHCHPtBu₂)₂}], in which the ruthenium(II) ions are in the extremely rare square‐planar coordination geometry. Whereas the dialkylamido complex adopts an electronic singlet (S=0) ground state and energetically low‐lying triplet (S=1) state, the vinyl alkyl amido and the divinyl amido complexes exhibit unusual triplet (S=1) ground states as confirmed by experimental and computational examination. However, essentially non‐magnetic ground states arise for the two intermediate‐spin complexes owing to unusually large zero‐field splitting (D>+200 cm^?1). The change in ground state electronic configuration is attributed to tailored pincer ligand‐to‐metal π‐donation within the PNP ligand series.     

Extraordinary transport behavior of gases in isothermally annealed poly(4‐methyl‐1‐pentene) membranes

Poly(4‐methyl‐1‐pentene) (PMP) membranes were modified through isothermal annealing to investigate the change of their crystalline structure and rigid and mobile amorphous fractions (RAF and MAF), assuming a three‐phase model, affected the gas transport behavior. The crystalline structure was characterized by wide‐angle X‐ray diffraction (WAXD) and small‐angle X‐ray scattering (SAXS) techniques, and the free volume properties were analyzed by positron annihilation lifetime spectroscopy. Compared with the pristine membrane, the annealed membranes show higher crystallinity; the crystals undergo partial structural change from form III to form I. The lamellar crystal thickness, rigid amorphous fraction thickness, and long period in the lamellar stacks increase with crystallinity. The annealed PMP membranes exhibit higher permeability due to the increase in larger size free volumes in MAF and higher selectivity due to the increase in smaller size free volumes in RAF, respectively. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2368–2376     

Radical Cyclisation of α‐Halo Aluminium Acetals: A Mechanistic Study

α‐Bromo aluminium acetals are suitable substrates for Ueno–Stork‐like radical cyclisations affording γ‐lactols and acid‐sensitive methylene‐γ‐lactols in high yields. The mechanistic study herein sets the scope and limitation of this reaction. The influence of the halide (or chalcogenide) atom X (X=Cl, Br, I, SPh, SePh) in the precursors α‐haloesters, as well as influence of the solvent and temperature was studied. The structure of the aluminium acetal intermediates resulting from the reduction of the corresponding α‐haloesters has been investigated by low‐temperature ¹³C‐INEPT diffusion‐ordered NMR spectroscopy (DOSY) experiments and quantum calculations, providing new insights into the structures of these thermally labile intermediates. Oxygen‐bridged dimeric structures with a planar Al₂O₂ ring are proposed for the least hindered aluminium acetals, while monomeric structures seem to prevail for the most hindered species. A comparison against the radical cyclisation of aluminium acetals derived from allyl and propargyl alcohols with the parent Ueno–Stork has been made at the BHandHLYP/6‐311++G(d,p) level of theory, highlighting mechanistic similarities and differences.